# Fire Prevention and Protection on Construction Sites

Source: https://usi.how/osha-10-construction/fire-prevention-and-protection-on-construction-sites

## Fire Hazards in Construction

### Common Fire Causes

- Electrical issues (damaged cords, overloaded circuits)
- Hot work (welding, cutting, grinding)
- Flammable liquids and gases
- Smoking materials
- Temporary heating devices
- Combustible materials (wood, paper, cardboard)
- Equipment malfunctions
- Spontaneous combustion of oily rags
 

### High-Risk Construction Activities

- Roofing operations with hot tar
- Welding near combustible materials
- Cutting or grinding producing sparks
- Painting and chemical applications
- Demolition exposing hidden ignition sources
- Temporary electrical installations
- Fuel transfers and refueling operations
 

## Understanding Fire

### Fire Triangle

A fire needs three elements to exist:

- **Fuel** (wood, paper, flammable liquids)
- **Heat** (spark, flame, hot surface)
- **Oxygen** (air)
 

Remove any one element and the fire will go out.

### Classes of Fire

- **Class A**: Ordinary combustibles (wood, paper, cloth)
- **Class B**: Flammable liquids and gases
- **Class C**: Energized electrical equipment
- **Class D**: Combustible metals
- **Class K**: Cooking oils and fats (rarely on construction sites)
 

## Fire Prevention Measures

### Housekeeping

- Keep work areas clean and free of debris
- Dispose of waste materials regularly
- Store oily rags in metal containers with self-closing lids
- Keep exit paths clear at all times
- Don't allow trash to accumulate, especially near ignition sources
- Clean up spills immediately
 

### Flammable and Combustible Materials

- Store flammable liquids in approved containers
- Keep only minimum amounts in work areas
- Maintain proper ventilation around storage areas
- Keep ignition sources away from storage areas
- Clearly mark containers with contents
- Separate incompatible materials
- Bond and ground containers when transferring flammables
 

### Hot Work Safety

- Obtain permits for hot work when required
- Remove combustibles from area or protect with fire-resistant covers
- Assign a fire watch during and after hot work
- Keep fire extinguishers readily available
- Check area for 30-60 minutes after work is complete
- Schedule hot work during less busy times when possible
 

### Electrical Fire Prevention

- Inspect cords and tools before each use
- Don't overload outlets or circuits
- Use proper extension cords for construction
- Keep electrical panels clear (minimum 3 feet)
- Turn off equipment when not in use
- Protect temporary wiring from damage
- Use GFCI protection
 

### Temporary Heating

- Keep heating devices away from combustible materials
- Set heaters on stable, level surfaces
- Turn off when unattended
- Provide proper ventilation for fuel-burning heaters
- Follow manufacturer's instructions
- Inspect for damage before use
 

## Fire Protection Equipment

### Fire Extinguishers

- Must be available within 100 feet of travel
- Minimum 2A rating for general protection
- 10B rating for flammable liquid areas
- Must be accessible and visible
- Must be inspected monthly (visual check)
- Must be serviced annually (by qualified person)
- Placed near exits when possible
 

### Extinguisher Types

- **Water (Class A)**: For ordinary combustibles
- **Dry Chemical (Class ABC or BC)**: Most common on construction sites
- **Carbon Dioxide (Class BC)**: For electrical and flammable liquid fires
- **Class D**: Special extinguishers for metal fires
- **Class K**: For cooking fires (rarely needed on construction)
 

### Fire Extinguisher Use (PASS method)

1. **P**ull the pin
2. **A**im at the base of the fire
3. **S**queeze the handle
4. **S**weep side to side
 

### When NOT to Fight a Fire

- The fire is spreading beyond the initial stage
- You don't have adequate or appropriate equipment
- You might inhale toxic smoke
- Your instincts tell you not to
- There's a risk of explosion
- Your exit path could be compromised
 

### Fire Detection and Alarm Systems

- May be required on some construction projects
- Temporary systems during construction of high-rises
- Must be tested regularly
- All workers should be familiar with alarm sounds
- Know how to manually activate alarms
- Directly connect to monitoring service when possible
 

## Emergency Response Planning

### Fire Emergency Plan

- Establish clear evacuation procedures
- Designate assembly points
- Assign evacuation wardens
- Post emergency numbers
- Conduct regular fire drills
- Document all emergency plans
- Review and update as site conditions change
 

### Evacuation Procedures

- Stop work immediately when alarm sounds
- Shut down equipment if safe to do so
- Leave the building using nearest exit
- Don't use elevators
- Report to designated assembly area
- Account for all workers
- Never re-enter until authorized
 

### Emergency Access

- Maintain clear access for fire department
- Keep fire lanes open
- Ensure fire hydrants remain accessible
- Post site address visibly for emergency responders
- Have someone meet fire department to direct them
 

## Special Considerations

### Multi-Story Construction

- Provide at least one stairway at all times
- Install standpipes as construction progresses
- Ensure exits are clearly marked
- Consider temporary sprinkler systems
- Add additional extinguishers at higher levels
 

### Underground Construction

- Provide special ventilation requirements
- Monitor air quality regularly
- Establish clear emergency evacuation routes
- Use only approved lighting and electrical equipment
- Have redundant communication systems
 

### Demolition Sites

- Shut off all utilities before starting
- Check for hazardous materials before beginning
- Remove combustible debris daily
- Maintain extra fire watches
- Have additional extinguishers readily available
 

## OSHA Requirements

### Fire Prevention Responsibilities

- Develop fire protection program for each job site
- Train employees on fire hazards and prevention
- Conduct regular inspections for fire hazards
- Maintain fire suppression equipment
- Ensure clear access to firefighting equipment
 

### Training Requirements

- All workers must know fire hazards of materials they work with
- Training on fire extinguisher use
- Understanding evacuation procedures
- Reporting fire emergencies
- Specific training for fire watch duties
