# Proper Use of Hand and Power Tools

Source: https://usi.how/osha-10-construction/proper-use-of-hand-and-power-tools

## General Tool Safety Rules

### Before Using Any Tool

- Select the right tool for the job
- Inspect for damage or defects
- Ensure guards and safety features are in place
- Verify proper operation
- Know how to use it properly
- Wear appropriate PPE
 

### Safe Work Practices

- Keep work areas clean and well-lit
- Maintain solid footing and balance
- Secure work with clamps or vise when possible
- Keep hands away from cutting edges and moving parts
- Focus on the task - avoid distractions
- Don't rush the job
- Put tools down safely when not in use
 

### Tool Maintenance

- Keep tools clean and dry
- Maintain sharp cutting edges
- Follow lubrication requirements
- Store properly when not in use
- Remove damaged tools from service
- Have repairs done by qualified persons
 

## Hand Tool Safety

### Cutting Tools (Knives, Saws, Chisels)

- Keep cutting edges sharp
- Cut away from your body
- Use with both hands when design allows
- Store with edges protected
- Pass handles first to others
- Secure workpiece before cutting
 

### Striking Tools (Hammers, Sledges, Mallets)

- Inspect handles for cracks or splinters
- Ensure head is secure on handle
- Strike squarely with the face of the head
- Wear eye protection to guard against flying chips
- Don't use as pry bars
- Don't strike hardened steel with steel hammers
 

### Wrenches and Pliers

- Pull toward you instead of pushing when possible
- Use correct size for the job
- Don't use cheater bars or extensions
- Position your body to prevent falls if the tool slips
- Don't use as hammers
- Avoid using on moving machinery
 

### Screwdrivers

- Use correct type and size for the screw
- Keep tips properly ground and squared
- Never hold work in your hand while screwdriving toward it
- Don't use as pry bars, punches, or chisels
- Don't put screwdrivers in pockets
- Use insulated handles for electrical work
 

## Power Tool Safety

### General Power Tool Guidelines

- Use tools with proper guards
- Disconnect from power source when changing accessories
- Avoid accidental starting (don't carry with finger on switch)
- Secure work with clamps or vise
- Maintain firm grip with both hands when possible
- Keep cords and hoses away from heat, oil, and sharp edges
- Remove all adjustment keys and wrenches before turning on
 

### Electric Tools

- Use tools with three-prong plugs or double insulation
- Keep work area dry
- Use GFCI protection, especially outdoors or in damp locations
- Inspect cords for damage before use
- Don't carry tools by their cords
- Don't yank cords to disconnect them
- Keep cords away from heat, oil, and sharp edges
 

### Pneumatic Tools

- Secure hose connections with wire, pins, or clips
- Install safety clips on impact tools to prevent accidental disconnection
- Never point at yourself or others
- Shut off air supply and bleed pressure before disconnecting
- Check manufacturer's recommendations for proper air pressure
- Secure tools to hose to prevent accidental disconnection
 

## Specific Power Tool Safety

### Circular Saws

- Keep guards in working order
- Check blade guard return springs
- Set blade depth to just clear material
- Allow saw to reach full speed before cutting
- Use both hands and proper stance
- Support material to prevent binding
- Allow blade to stop before setting saw down
 

### Drills

- Secure material before drilling
- Use sharp bits of correct type for material
- Apply steady pressure when drilling
- Back off pressure when nearing breakthrough
- Remove bit from chuck immediately after use
- Never use your hands to stop a spinning chuck or bit
 

### Grinders

- Let grinder reach full speed before applying to work
- Use the correct wheel for the material
- Inspect wheels for cracks before mounting
- Never remove guards
- Position yourself to avoid grinding debris
- Hold at 15-30 degree angle for optimum cutting
- Allow wheel to stop naturally, not by pressing against material
 

### Power Saws (Table, Miter, Band)

- Keep all guards in place
- Use push sticks for small pieces
- Don't reach over or behind the blade
- Turn off and unplug before adjusting
- Keep blade clean, sharp, and properly set
- Feed material at proper rate
- Never leave running unattended
 

### Sanders

- Move constantly to avoid overheating or gouging
- Keep both hands on tool
- Secure small workpieces
- Use dust extraction systems when possible
- Allow tool to reach full speed before contacting work
- Lift from work before stopping
- Clean dust collection systems regularly
 

### Nail Guns and Staplers

- Treat as loaded at all times
- Keep finger off trigger when not firing
- Never point at yourself or others
- Disconnect air supply when clearing jams
- Never disable the safety contact tip
- Use sequential trigger instead of contact (bump) trigger when possible
- Check for hidden electrical wires or plumbing before firing
 

## Battery-Powered Tool Safety

### General Battery Tool Safety

- Use manufacturer-recommended batteries only
- Store batteries away from metal objects
- Keep batteries away from water
- Don't use damaged batteries
- Follow charging instructions
- Remove battery before changing accessories
 

### Lithium-Ion Battery Precautions

- Protect from extreme temperatures
- Don't fully discharge batteries
- Inspect for damage or swelling
- Don't charge unattended
- Dispose of properly
- Store in fire-resistant container
 

## Tool-Related Hazards and Prevention

### Electrical Hazards

- Inspect cords and plugs before each use
- Use three-prong plugs in three-prong outlets
- Don't defeat grounding features
- Use GFCI protection
- Keep tools and cords dry
- Use double-insulated tools when possible
 

### Flying Debris

- Always wear eye protection
- Consider face shields for high-risk operations
- Position work to direct debris away from others
- Use dust collection systems
- Keep guards in place
- Post warning signs when necessary
 

### Noise Hazards

- Use hearing protection with noisy tools
- Minimize exposure time
- Maintain tools to reduce noise
- Consider noise levels when purchasing tools
- Position noisy operations away from others
- Get hearing checked regularly
 

### Vibration Hazards

- Use anti-vibration gloves
- Take frequent breaks
- Hold tools loosely but securely
- Keep hands warm and dry
- Alternate between vibrating and non-vibrating tasks
- Report early symptoms (tingling, numbness)
 

## When Not to Use Tools

- When you haven't been trained
- When guards or safety features are missing
- When tools are damaged
- When you're too tired or impaired
- In unsafe conditions (standing in water, etc.)
- When proper PPE isn't available
- When the wrong tool might seem "convenient"
