# Recognizing Workplace Hazards

Source: https://usi.how/osha-10-construction/recognizing-workplace-hazards

## Types of Workplace Hazards

### Physical Hazards

- Falls from heights
- Struck-by flying or falling objects
- Caught-in or caught-between machinery
- Electrical hazards
- Extreme temperatures
- Excessive noise
- Poor lighting
- Radiation
 

### Chemical Hazards

- Dusts (concrete, wood, silica)
- Fumes from welding or vehicle exhaust
- Gases like carbon monoxide
- Solvents and paint thinners
- Acids and cleaning products
- Asbestos and lead in older buildings
- Isocyanates in some paints
 

### Biological Hazards

- Mold and fungi
- Bacteria and viruses
- Insect or animal bites
- Bird or rodent droppings
- Contaminated water
- Bloodborne pathogens
 

### Ergonomic Hazards

- Repetitive motions
- Awkward postures
- Excessive force or lifting
- Vibration from tools
- Prolonged kneeling or squatting
- Poor workstation design
 

## How to Spot Hazards

### Look Around You

- Scan your work area before starting
- Check for hazards above, below, and around you
- Watch for changing conditions throughout the day
- Pay special attention after breaks when things might have changed
 

### Listen to Warning Signs

- Unusual noises from equipment
- Alarms or warning signals
- Complaints from coworkers about discomfort
- Sound of water or gas leaking
 

### Use Your Other Senses

- Smell unusual odors (gas, chemicals, burning)
- Feel excessive heat, cold, or vibration
- Notice if breathing becomes difficult
- Be alert to dizziness or other symptoms
 

## Job Safety Analysis (JSA)

Break each task into steps and identify hazards:

1. **Select the job to analyze**
    - Focus on jobs with higher injury rates
    - New tasks or procedures
    - Tasks that have changed
2. **Break the job into steps**
    - What is done first?
    - What happens next?
    - How does the job end?
3. **Identify hazards at each step**
    - What could go wrong?
    - What could cause an injury?
    - What environmental conditions exist?
4. **Develop controls for each hazard**
    - Can the hazard be eliminated?
    - Can the job be done differently?
    - What protective equipment is needed?
 

## Common Construction Hazards and Warning Signs

### Fall Hazards

- Missing guardrails
- Holes in flooring
- Wet or slippery surfaces
- Unstable work surfaces
- Improperly set up ladders
- Missing fall protection
 

### Electrical Hazards

- Frayed or damaged cords
- Missing ground pins
- Exposed wiring
- Overloaded outlets
- Tools used in wet conditions
- Overhead power lines
 

### Struck-By Hazards

- Objects stored at heights
- Unsecured tools or materials
- Heavy equipment operation
- Flying particles from grinding or cutting
- Vehicles in work zones
- Loads being moved overhead
 

### Caught-In Hazards

- Unprotected trenches
- Machinery without guards
- Rotating equipment
- Pinch points
- Clothing or jewelry that could get caught
- Unguarded wall openings
 

### Health Hazards

- Visible dust in the air
- Strong chemical smells
- Unlabeled containers
- Excessive noise
- Extreme temperatures
- Lack of ventilation
 

## Reporting Hazards

If you spot a hazard:

1. **Report it immediately** to your supervisor
2. **Warn your coworkers** about the danger
3. **Document the hazard** if possible (photos, notes)
4. **Suggest solutions** if you have ideas
5. **Follow up** to ensure action is taken
6. **Contact OSHA** if necessary hazards aren't addressed
